Have any question?
Soler & Palau Ventilation Group
We have always believed in our project and we have made it happen. Reality has gone beyond borders and we have become a team. We have shown that our people, their behaviour and their knowledge will build the future.
Soler&Palau was created in 1951. In the early years, we worked hard, with great determination, to take Soler & Palau Ventilation Group beyond our borders and give it a global dimension. We are proud to have taken this path with all of the people that participate and have participated in this project.
For further information about S&P please see www.solerpalau.com
INDUSTRIAL VENTILATION (ATEX FANS FOR EXPLOSIVE HAZARDOUS)
ROOF MOUNTED ATEX FANS
Range of roof mounted mixed flow fans, specially designed for the extraction of potentially hazardous and explosive gases, manufactured from sheet steel protected with black polyester paint coating .Bird-proof guard. Detachable fan unit without demounting duct connections.
ATEX AXIAL FLOW FANS AND JET FANS
Range of plate mounted axial flameproof fans. Mounting plate manufactured from galvanized sheet steel fitted with an internal aluminium ring and motor support manufactured from heavy gauge aluminium sheet.
ACOUSTIC CABINET ATEX FANS
Range of forward curved belt drive cabinet fans manufactured from galvanized steel sheet, internally lined with melamine thermo-acoustic insulation.
All models incorporate a double inlet low pressure centrifugal fan mounted on anti-vibration mounts and flexible coupling at the discharge. Supplied as standard in horizontal discharge configuration with motor, pulley and belt assembly on the right hand side of the unit when viewed from the discharge end.
CENTRIFUGAL ATEX FANS
Range of single inlet direct driven centrifugal fans designed for the continuous extraction of air stream up to 120ºC.
The casings are manufactured from one piece die cast aluminium and finished with a tough, grey colour, epoxy-polyester paint coating.
IN-LINE DUCT ATEX FANS
Range of in-line rectangular duct fan, specially designed for the extraction of potentially hazardous and explosive gases. Manufactured from galvanised steel sheet and provided with an inspection cover that can be removed to access the motor/ impeller assembly without having to remove the complete fan casing from the ducting.